"cylinder head removal kit"

[Colin Reed]

HI All,
In these circumstances  I use a FOX Wedge,
For those who have never seen one they are a hardened steel wedge and come in different sizes.
As an example one of mine is 2' wide x 6" long x 3/8" at the one end tapering to 1/64"
On something like a head would use 4 two on each side and you just tap them in slowly with a light load lifting the head' this way no damage to studs or spark plug threads and because of slow taper will not damage head or block

Cheers
Colin
NZ