18-03-2019, 06:05 PM
Just in case anybody is faced with the same problem.........
the curved tube of the primary feed cleans out nicely with a length of inner brake cable in an electric drill. I found it best to start off with the drill running backwards so that the cable doesn't unwind itself, then once it is through, switch to forward speed to give a sort of wire brush effect as it tries to unravel.
the curved tube of the primary feed cleans out nicely with a length of inner brake cable in an electric drill. I found it best to start off with the drill running backwards so that the cable doesn't unwind itself, then once it is through, switch to forward speed to give a sort of wire brush effect as it tries to unravel.