14-03-2019, 08:59 PM
Dickie, many thanks for your reply. I have seen pictures of the double spring Bowdenex arrangement and I know there are quite a few examples in use. I would certainly consider buying one if it came up, same applies to the Speedex system. I may be wrong but I feel that should I have to build something perhaps the Speedex option might be the easiest.
I shall also have to fabricate forward facing Ackerman steering arms. I'm hoping to use Hillman Imp rack and pinion steering and with the inner track rod ends lining up with the axle inner pivot bolts there should be no risk of bump steer.
I'm very aware that everything under the sun will have been tried, used or binned and I'm anxious not to fall into any Elephant traps by asking these questions before going too far.
John
I shall also have to fabricate forward facing Ackerman steering arms. I'm hoping to use Hillman Imp rack and pinion steering and with the inner track rod ends lining up with the axle inner pivot bolts there should be no risk of bump steer.
I'm very aware that everything under the sun will have been tried, used or binned and I'm anxious not to fall into any Elephant traps by asking these questions before going too far.
John