13-03-2019, 09:25 AM
Paul - unless the shoes are flat against the cams, you won't have full, safe future movement of the cam as the surfaces wear. You may need to back things (cable) off elsewhere and remove other bits of shim added in the past... and it gives you the opportunity of checking where the lever ends up. The cams may need freeing off so they move easily?
Just another note about Austin part numbers ambiguity. The Platts (mid 1980s) part numbers confirm that cam pairs are the same for 1 and 1 1/4". i.e. that they are interchangeable.
Just another note about Austin part numbers ambiguity. The Platts (mid 1980s) part numbers confirm that cam pairs are the same for 1 and 1 1/4". i.e. that they are interchangeable.