10-03-2019, 01:02 PM
(This post was last modified: 10-03-2019, 01:04 PM by Tom Coates.)
(09-03-2019, 11:41 PM)Ruairidh Dunford Wrote: Tom Coates, this Cup is also on lowered springs...I was just thinking that!
Bill, I think your problem is the combination of a late exhaust manifold which comes down a bit further and a new front pipe. I have an original one and it runs over the hoop but with a bit of a kink behind it to drop down and line up with the silencer.
I also have problems with my front brake cables rubbing on the bottom of the hoop (even with normal height springs, but yours look ok.
My tail pipe tucks inboard of the shock absorbers and runs below the axle with a slight bend below it. I've fitted an aly fish tail and it works quite well.
I am going to send Tom's plans to Andrew Goodfellow when I'm done.