02-03-2019, 05:24 PM
I am with Dickie65. Take the flywheel cover off and slacken the bolts. Turn the engine over to bring all the bolts to the top in turn to enable all bolts to be loosened. Then start the engine and take off with a bit of a jerk. If this works there is no need to remove either gearbox or engine.
John Mason
P.s. Don't forget to retighten afterwards.
John Mason
P.s. Don't forget to retighten afterwards.
Would you believe it "Her who must be obeyed" refers to my Ruby as the toy.