28-02-2019, 09:00 PM
Pickup filter is a hydraulic suction filter from MFH online mfhydraulics. co.uk part no. CV105-38 CV105-12 CV105-34 depending what size
the last no. is the fitting size 3/8bsp 1/2bsp 3/4bsp a nylon connecting thread. the one in the photo is a 3/4 size but I remove the nylon
connector and make a steel one so I can solder it to a 10mm 3/8 pickup pipe on a over bored splash pump or a 12mm pipe on pressure pump. The 3/8bsp you could fit directly to a pipe but the filter is a bit small, they are quite cheap to buy so you could buy all 3 sizes and decide which to use, the photo is a 3/4 on a 10mm pipe because that's what I had at the time.
Terry.
the last no. is the fitting size 3/8bsp 1/2bsp 3/4bsp a nylon connecting thread. the one in the photo is a 3/4 size but I remove the nylon
connector and make a steel one so I can solder it to a 10mm 3/8 pickup pipe on a over bored splash pump or a 12mm pipe on pressure pump. The 3/8bsp you could fit directly to a pipe but the filter is a bit small, they are quite cheap to buy so you could buy all 3 sizes and decide which to use, the photo is a 3/4 on a 10mm pipe because that's what I had at the time.
Terry.