23-02-2019, 01:15 PM
Hi David
I can only tell you what I have found out by doing this on my 2-seat AEW (Box saloon type rad shell).
The following order I found was best for me:
1/ Loosely Fit Rad shell/Radiator assembly
2/ Fit wing support brackets - tune the tightening of the Rad shell bolts and wing support bracket bolts in order to get good central alignment with nose cone/Rad shell nose cone hole
3/ Check alignment of the bonnet
4/ Fit wings
I found that it was impossible on my car to get the Radiator Shell in to the front of the car with the wing brackets bolted up tight.
Good luck, Regards Peter
I can only tell you what I have found out by doing this on my 2-seat AEW (Box saloon type rad shell).
The following order I found was best for me:
1/ Loosely Fit Rad shell/Radiator assembly
2/ Fit wing support brackets - tune the tightening of the Rad shell bolts and wing support bracket bolts in order to get good central alignment with nose cone/Rad shell nose cone hole
3/ Check alignment of the bonnet
4/ Fit wings
I found that it was impossible on my car to get the Radiator Shell in to the front of the car with the wing brackets bolted up tight.
Good luck, Regards Peter