21-02-2019, 07:07 PM
I'm not too familiar with this, but did consider putting one on my Ulster Rep when it had a side draft SU on it. I then converted to a 30 MOV and gravity feed. The original Enots pump had three settings. Off(locked) On(pump) and bleed. The latter was important as on a hot day, you don't want too much pressure. Modern reproductions only have the Off and On settings, so you have to incorporate a bleed valve somewhere. Genuine blown Ulsters had a gauge and I think the pressure was 1-2 lbs/sq inch.Robert Foreman will know much more, and I think was working on a three way pump a year or so ago. Others may also be able to help.
Erich in Seattle
Erich in Seattle