19-02-2019, 08:22 PM
(This post was last modified: 19-02-2019, 08:23 PM by Martin Prior.)
Getting back to the original thread, we found a bit of time during the day to play around (with help from grandson Henry) with modelling our planned hardtop body.
As I mentioned before, the idea is to use as much standard, or only lightly modified A7 woodwork as possible from our stock range. The working plan is that the scuttle, A-posts and windscreen frame, doors and much of the roof will be based on the RK saloon, and the tail on Nippy components.
We've been sorting out clearances and proportions, making sure that Dave, the tallest member of the family, has adequate headroom. We've also been trying to decide on how long the tail should be.
Preliminary drawings next.
As I mentioned before, the idea is to use as much standard, or only lightly modified A7 woodwork as possible from our stock range. The working plan is that the scuttle, A-posts and windscreen frame, doors and much of the roof will be based on the RK saloon, and the tail on Nippy components.
We've been sorting out clearances and proportions, making sure that Dave, the tallest member of the family, has adequate headroom. We've also been trying to decide on how long the tail should be.
Preliminary drawings next.