07-02-2019, 12:19 PM
(This post was last modified: 07-02-2019, 12:23 PM by Martin Prior.)
(07-02-2019, 10:30 AM)WiandeV Wrote: Hi Guys and Girls
I am new here an a bit new the the Austin family. I have inherited my grandfathers 1932 RP saloon if that is what it is. It has been standing in a state off disassembly for the past 20 years. Until it came up to me and I drove it under its own power onto a trailer where it went into storage for the past couple off years.
I pulled it out recently to start the restoration, or rather finish it off.
I come from the classic mini scene so all this is fairly new to me.
First question, is there a parts guide somewhere so I can check what is there and what I need to get? The mechanical stuff is all there and everything works bar the dynamo. I am more worried about all the little rubbers and seals for the doors windows and hood. The sun roof also needs a whole bunch of parts.
Cheers
Wian
Hi Wian.
Everything you'll need for your RP is readily available.
If you haven't already found it, look at the Austin Seven Clubs' Association website www.a7ca.org - full of useful information and contacts. Try the "always quote this number" http://a7ca.org/downloads/QuoteThisNumber.pdf link to help you find all of the identification numbers - If you can locate the body number on the transmission tunnel, that'll confirm whether your car is an RP.