05-02-2019, 11:06 PM
I wouldn't run an engine with a flywheel runout of 0.015". I would remachine it to less than 0.002" maximum and then get the unit balanced.
This is what happens when things are swapped around. Measuring original crank/flywheel units they have clocked up to around 0.002" total runout. That is basically 0.001" out of true position .
This is what happens when things are swapped around. Measuring original crank/flywheel units they have clocked up to around 0.002" total runout. That is basically 0.001" out of true position .