30-01-2019, 10:44 PM
Hi,
Your clutch is the correct item for the Type 65
It is neither newton bennett or borg and beck.
It is the earlier type so order the linings for the car year.
It is no problem to drill a second set of holes between the loose rivets and put in new rivets.
Make sure that there are no splits near the existing rivet hole in the centre plate.
Ball Pein hammer and dolly, sharp drill and rivets needed.
It will be worth changing the linings for new ones if they are oily, when you fit new linings the rivets will not be much more than 1 mm from the surface level.
Your clutch is the correct item for the Type 65
It is neither newton bennett or borg and beck.
It is the earlier type so order the linings for the car year.
It is no problem to drill a second set of holes between the loose rivets and put in new rivets.
Make sure that there are no splits near the existing rivet hole in the centre plate.
Ball Pein hammer and dolly, sharp drill and rivets needed.
It will be worth changing the linings for new ones if they are oily, when you fit new linings the rivets will not be much more than 1 mm from the surface level.