Wheel hub bearing removal

[Steve Jones]

All you need is a good general purpose grease. I've used the first one you mention but at the moment, I think I'm on a Millers version. It all depends what they've got when I buy it. The biggest reason that hub grease on Sevens gets onto brake linings is over greasing the hubs. The original handbooks said that this should be done at regular intervals but all that does is fill the hub with grease to the point that, when full, the grease finds its way past the hub seals/gaskets and onto the linings. Grease the wheel bearings when fitting them, put a small amount in the hub outer, fit the hub and forget about it. It's the way the hub bearings are lubricated on your modern and how often do you re-grease those?

Steve