16-01-2019, 11:29 AM
(This post was last modified: 16-01-2019, 11:30 AM by Ruairidh Dunford.)
Mark,
I suffered initial rapid wear with a unit that had the Dynamator gears fitted.
After front end engine rebuild I fitted original Austin gears gears to both ends of the Dynamator and drove 2500 miles around France in the car (see here: http://www.austinsevenfriends.co.uk/foru...ght=France) the car has done a further 500 miles since and suffered no issues or wear whatsoever - as you can imagine, I inspected it very regularly.
They are not for everyone, they are not allowed in some Clubs but, in my experience, they offer a reliable and cost effective alternative if you require a replacement.
I am very happy to discuss my personal experiences of using the units on 01419428037, if you wish.
I suffered initial rapid wear with a unit that had the Dynamator gears fitted.
After front end engine rebuild I fitted original Austin gears gears to both ends of the Dynamator and drove 2500 miles around France in the car (see here: http://www.austinsevenfriends.co.uk/foru...ght=France) the car has done a further 500 miles since and suffered no issues or wear whatsoever - as you can imagine, I inspected it very regularly.
They are not for everyone, they are not allowed in some Clubs but, in my experience, they offer a reliable and cost effective alternative if you require a replacement.
I am very happy to discuss my personal experiences of using the units on 01419428037, if you wish.