Hi All
New photos to cast an eye over, hope I've covered all requests.
Ruairidh carb details as follows.
Carb number C1565
Main jet 2.0
Needle Valve 1.5
Its the first time I have looked at the carb in detail, glad I did.
Float chamber full of black slimy stuff but more importantly throttle not opening fully, due to loose spindle nut.
Investigation found the spindle shaft thread damaged resulting in only able to tighten to finger tightness.
Many thanks for your interest, comments very welcome, up to six months ago I had no experience of Austin Seven's but learning fast!
Hi All
New photos to cast an eye over, hope I've covered all requests.
Ruairidh carb details as follows.
Carb number C1565
Main jet 2.0
Needle Valve 1.5
Its the first time I have looked at the carb in detail, glad I did.
Float chamber full of black slimy stuff but more importantly throttle not opening fully, due to loose spindle nut.
Investigation found the spindle shaft thread damaged resulting in only able to tighten to finger tightness.
Many thanks for your interest, comments very welcome, up to six months ago I had no experience of Austin Seven's but learning fast!
New photos to cast an eye over, hope I've covered all requests.
Ruairidh carb details as follows.
Carb number C1565
Main jet 2.0
Needle Valve 1.5
Its the first time I have looked at the carb in detail, glad I did.
Float chamber full of black slimy stuff but more importantly throttle not opening fully, due to loose spindle nut.
Investigation found the spindle shaft thread damaged resulting in only able to tighten to finger tightness.
Many thanks for your interest, comments very welcome, up to six months ago I had no experience of Austin Seven's but learning fast!
Hi All
New photos to cast an eye over, hope I've covered all requests.
Ruairidh carb details as follows.
Carb number C1565
Main jet 2.0
Needle Valve 1.5
Its the first time I have looked at the carb in detail, glad I did.
Float chamber full of black slimy stuff but more importantly throttle not opening fully, due to loose spindle nut.
Investigation found the spindle shaft thread damaged resulting in only able to tighten to finger tightness.
Many thanks for your interest, comments very welcome, up to six months ago I had no experience of Austin Seven's but learning fast!