13-01-2019, 05:58 PM
Lucas tended to use brass grub screws with BA threads for terminals, if that's what you are after.
People then merrily overtightened them "just in case"
Even numbers are preferred, such as 2 BA and 4 BA, but you will need to measure one to be sure
If you are stuck, grubscrews can of course be fashioned from conventional brass BA screws chopped down and then slotted.
People then merrily overtightened them "just in case"
Even numbers are preferred, such as 2 BA and 4 BA, but you will need to measure one to be sure
If you are stuck, grubscrews can of course be fashioned from conventional brass BA screws chopped down and then slotted.