13-01-2019, 01:44 PM
(13-01-2019, 12:25 PM)Simon Scott Wrote: Yes it’s the 1/2 hub, I wasn’t sure how the layshaft would be the culprit but the selector balls were also out so maybe involved. Casing and layshaft are currently at a local engineering firm for sorting. I’m new to all this so learning on the job, will recheck all tolerances.
I don't know if you caught it but there was quite a useful thread on here recently Simon about addressing layshaft bush wear.
I think to resolve the question about play you'll need the box back together but frankly having got this far won't you consider fitting new bearings? They aren't crazy expensive. You may find you have to transfer the snap ring from old bearing to new and perhaps shim to get a suitable amount of end float.