07-01-2019, 09:25 PM
Yes to all above, I discussed this with Loctite technical team once and heat + brute force is the only way.
Depends very much what grade was used (please keep this in mind when using it yourself...) but as Colin says the more serious grades won't budge below about 250C. Which is all very well but many parts won't survive that temperature especially if applied locally.
Depends very much what grade was used (please keep this in mind when using it yourself...) but as Colin says the more serious grades won't budge below about 250C. Which is all very well but many parts won't survive that temperature especially if applied locally.