10-08-2017, 03:49 PM
(This post was last modified: 10-08-2017, 04:44 PM by Steve Jones.)
Dave Dye has a couple of my oil pumps for over-boring and renovation. He's also got pretty much all of the vanes I have that aren't inside engines and they're not too good as is often the case. However, the best two have caused us both to be a bit puzzled in that one is 10 thou too long, the other 8 thou meaning that when a pump is assembled using these vanes the base doesn't fit flush with the pump body. In all other dimensions, both are exactly as they should be. Neither of us has ever seen over length vanes before. Any ideas as to why they should be over long?
New vanes don't appear to be available. If anybody's got a couple of good sets spare, I'd be grateful to buy them.
Steve
New vanes don't appear to be available. If anybody's got a couple of good sets spare, I'd be grateful to buy them.
Steve