03-12-2018, 05:39 PM
(This post was last modified: 03-12-2018, 05:40 PM by Bryan Downes.)
Martin,
the RK sliding roof panel is 34 inches wide X 28 inches front to back. These are the dimensions of the wood frame not including the metal shrouds that cover the rails. The panel is not flat and is curved in both directions to follow the roof line and to shed water.
I have only seen 6 or 7 RK's with original factory fitted Pychley sunroofs. Probably no more than 10 exist so quite rare.
Bryan
Martin,
the RK sliding roof panel is 34 inches wide X 28 inches front to back. These are the dimensions of the wood frame not including the metal shrouds that cover the rails. The panel is not flat and is curved in both directions to follow the roof line and to shed water.
I have only seen 6 or 7 RK's with original factory fitted Pychley sunroofs. Probably no more than 10 exist so quite rare.
Bryan
the RK sliding roof panel is 34 inches wide X 28 inches front to back. These are the dimensions of the wood frame not including the metal shrouds that cover the rails. The panel is not flat and is curved in both directions to follow the roof line and to shed water.
I have only seen 6 or 7 RK's with original factory fitted Pychley sunroofs. Probably no more than 10 exist so quite rare.
Bryan
Martin,
the RK sliding roof panel is 34 inches wide X 28 inches front to back. These are the dimensions of the wood frame not including the metal shrouds that cover the rails. The panel is not flat and is curved in both directions to follow the roof line and to shed water.
I have only seen 6 or 7 RK's with original factory fitted Pychley sunroofs. Probably no more than 10 exist so quite rare.
Bryan