(14-11-2018, 01:55 PM)Bill Dixon Wrote: Chris KC, if you post all dimensions will make it a lot easy to find a car it would fit, ie width height.
Bill,
It's 40" between the irons, give or take a whisker.
Top section is 7 1/2" deep; lower is 9 5/8" deep, with overlap 1.5" (i.e. overall screen height is 15 5/8")
The irons extend about 10 1/2" below the screen.
(15-11-2018, 09:46 AM)Mike Costigan Wrote: Whilst I would agree that the top tube is very Austin-like, the other fittings and construction details are not Austin.
Mike, I've not really been able to inspect in proper detail, but for me the difference in finish / materials between upper and lower screen surrounds and the plain steel uprights suggests a special rather than a production car. A nicely made job though, so I'm thinking perhaps one of the post-war specials produced in modest numbers. I'm struggling though to think of one which had a straight scuttle or a raked rectangular screen.