22-09-2017, 10:31 AM
(22-09-2017, 09:39 AM)John L Wrote: Thanks for the replies. I will take those measurements tonight and I will try to upload pics too.
I intend to use a 1 1/2" splash crank with new rods and shells.
I have large inlets and double valve springs. Lightened flywheel t.v.
The only modified followers I have are flat which I used with a standard cam in my last engine. I intend to order a set from pigsty when I decide which cam suits me best. Also need to chat to them about a suitable oil pump and jets.
I have only just noticed that the pigsty cam does not have the off centre lobe for the fuel pump and it looks like it never had??
The eccentric lobe only came in when a mechanical pump was introduced, late 1932. Yours must be an earlier one.
Robert Leigh