Thanks for the replies. I will take those measurements tonight and I will try to upload pics too.
I intend to use a 1 1/2" splash crank with new rods and shells.
I have large inlets and double valve springs. Lightened flywheel t.v.
The only modified followers I have are flat which I used with a standard cam in my last engine. I intend to order a set from pigsty when I decide which cam suits me best. Also need to chat to them about a suitable oil pump and jets.
I have only just noticed that the pigsty cam does not have the off centre lobe for the fuel pump and it looks like it never had??
I intend to use a 1 1/2" splash crank with new rods and shells.
I have large inlets and double valve springs. Lightened flywheel t.v.
The only modified followers I have are flat which I used with a standard cam in my last engine. I intend to order a set from pigsty when I decide which cam suits me best. Also need to chat to them about a suitable oil pump and jets.
I have only just noticed that the pigsty cam does not have the off centre lobe for the fuel pump and it looks like it never had??