23-10-2018, 10:40 AM
(This post was last modified: 23-10-2018, 12:31 PM by Ruairidh Dunford.)
The rods were fitted with bushes to suit the 13mm floating pins of the Honda pistons.
We simply removed these bushes and made up new ones to suit the 1/2” standard sized floating pins.
There was no need to replace the Pheonix rods as the o/d of the bushes was identical and the little end unchanged from the way they were produced.
We simply removed these bushes and made up new ones to suit the 1/2” standard sized floating pins.
There was no need to replace the Pheonix rods as the o/d of the bushes was identical and the little end unchanged from the way they were produced.