05-10-2018, 03:03 PM
(This post was last modified: 05-10-2018, 03:04 PM by Hedd_Jones.)
Go to wilcos and buy the cheapest decent sized plastic box you can find. Using a hole saw some araldite and some plastic tube make two connections to which you can attach the hoses to. Swap it with the rad andĀ Fill with water and run the engine.
Your tank cooled engine will demonstrate if the thermosyphon is working. Any bubbles will be visible.
Your tank cooled engine will demonstrate if the thermosyphon is working. Any bubbles will be visible.