26-09-2018, 07:08 PM
(This post was last modified: 26-09-2018, 07:10 PM by Andy Bennett.)
I had exactly this with a head stud. Tried every trick, including hanging the car from the garage roof by the head. Nothing would release it from the stud. Had local A7 expert around to retry all tricks.
Eventually we got it moved by about 2mm t slip a hacksaw blade in and cut it off under the block, then drilled it out in the block and helicoiled in situ.
Sorry not the solution you are looking for.
Andy B
Eventually we got it moved by about 2mm t slip a hacksaw blade in and cut it off under the block, then drilled it out in the block and helicoiled in situ.
Sorry not the solution you are looking for.
Andy B
Enjoy yourself, it's later than you think!