25-09-2018, 11:19 PM
(This post was last modified: 25-09-2018, 11:25 PM by Bob Culver.)
The bushes seem to wear little on the shaft. With care can be removed and if not too thin spaced with a washer. Others have described a drilled plate with flats manipulated behind the bush to enable it to be pulled out.
The loose syncro is a common and more difficult problem. Would expect curious symptoms but dont seem to hear of. I suppose Loctite is now the cure but difficult to clean the splines first. If removed tricky to refit; must go back in same palce.
The loose syncro is a common and more difficult problem. Would expect curious symptoms but dont seem to hear of. I suppose Loctite is now the cure but difficult to clean the splines first. If removed tricky to refit; must go back in same palce.