20-09-2018, 09:39 PM
(This post was last modified: 20-09-2018, 09:43 PM by Zetomagneto.)
(20-09-2018, 08:55 PM)Nigel Ricardo Wrote: Most of the good pairs of gears have been bought by people who have had the Accuspark Dynomator ruin their gears.
Really! I saw numerous at the international Autojumble.
There is no shortage of good gears
(20-09-2018, 08:41 PM)Ian Williams Wrote: If your camshaft has been reground you need to carefully check that the followers are staying in contact with the base circle, two things can happen. If you have not shortened the follower guides the tappet lock nut will prevent the follower remaining in contact with the base circle. And/or, it the cam has been reground with a narrow wheel the follower foot might be too wide and riding on the shoulder formed when reground rather than the base circle.
Ian, good points well made.The cam is said to be new, not reground so should be full width lobes.
Hopefully shortened guides otherwise how can you set up the timing corectly with a degree wheel.