20-09-2018, 10:56 AM
(This post was last modified: 20-09-2018, 10:57 AM by Austin in the Shed.
Edit Reason: add content
)
What work have you done to the engine ?
If its a coil engine take the rectangular cover off the dynamo housing (Briefly) when its running to see if there is an adequate oil supply to the gears.
If you are using different timing gears/mismatched gears they could be noisy,but if they are cast iron (original gears) they will get more quiet when they bed together.If you have a high lift cam they will run noisier.
If its a coil engine take the rectangular cover off the dynamo housing (Briefly) when its running to see if there is an adequate oil supply to the gears.
If you are using different timing gears/mismatched gears they could be noisy,but if they are cast iron (original gears) they will get more quiet when they bed together.If you have a high lift cam they will run noisier.