13-09-2017, 09:24 PM
(This post was last modified: 13-09-2017, 09:32 PM by Marcus Ling.)
(13-09-2017, 08:39 PM)Ian Williams Wrote: If they are no longer available in the UK a friend had some laser cut here, he may still have a few left and posts here occasionally, I can ask.
If you struggle to get one in the UK I do still have a few left here in NZ
(13-09-2017, 09:24 PM)Marcus Ling Wrote:(13-09-2017, 08:39 PM)Ian Williams Wrote: If they are no longer available in the UK a friend had some laser cut here, he may still have a few left and posts here occasionally, I can ask.
If you struggle to get one in the UK I do still have a few left here in NZ
We also produce locally 3 other A7 spanners
A Is for the half shaft nut designed to be kept in the car in case of roadside emergencies as it takes up no room
B is for the rear hub bearing nut designed to to save wear and tear on your cold chisel
C is a copy of an original Austin tool and fits the brass nut on the top of the steering boax as well as the bearing collar nut on the torque tube, the octagonal end fits the alloy front hub caps