18-08-2018, 07:30 PM
Hello Chris,
on my Ulster reproduction I used a RN type radiator with the neck at the front.
Mr Bryant of Tunbridge Wells removed the original neck and soldered an L shaped patch over the hole . Then he soldered a new neck in the correct position and recored it with a A type film to the correct height.
If you have a new neck turned up to the correct shape then most competent radiator companies should be able to to do the job for you.
There is a company in Australia who still make the dimpled top tank if you choose to replace the existing one
Hope this is of help,
Robert
on my Ulster reproduction I used a RN type radiator with the neck at the front.
Mr Bryant of Tunbridge Wells removed the original neck and soldered an L shaped patch over the hole . Then he soldered a new neck in the correct position and recored it with a A type film to the correct height.
If you have a new neck turned up to the correct shape then most competent radiator companies should be able to to do the job for you.
There is a company in Australia who still make the dimpled top tank if you choose to replace the existing one
Hope this is of help,
Robert