14-08-2018, 11:18 PM
(This post was last modified: 14-08-2018, 11:23 PM by Marcus Ling.)
(14-08-2018, 08:44 PM)Graham Honnor Wrote: Hello All
I am doing the rear hubs on my '37 Ruby axle and wondered if anyone could tell me what size the thin nut is that holds the inner half of the hub on please.
My largest Whitworth socket is 3/4" which fits the half shaft nut but I'll need a box spanner to do the thin nut or a deep socket.
Many thanks as always
Graham.
Hi Graham,
The new nuts I have here need a 1" Whitworth spanner to fit them. We make a special flat spanner here to fit them.
This is what we make
Rear Hub Bearing spanner.jpg (Size: 204.09 KB / Downloads: 284)
Cheers
Marcus