12-08-2018, 07:16 PM
(This post was last modified: 12-08-2018, 07:51 PM by Graham Honnor.)
Hello Jim
Thanks for your reply.
I've just seen those on the Seven Workshop site but as my bearings are so good I thought I'd
try the cheaper option first.
I also did a search and see that some people use the sealed bearing and the felt seal which makes
sense, especially if your plagued with oil from the axle.
I'll see how it goes and may go down that route if this fails.
May I ask what you, or others use to seal the 2 halves of the hub together with please.
Thank you.
Graham
Thanks for your reply.
I've just seen those on the Seven Workshop site but as my bearings are so good I thought I'd
try the cheaper option first.
I also did a search and see that some people use the sealed bearing and the felt seal which makes
sense, especially if your plagued with oil from the axle.
I'll see how it goes and may go down that route if this fails.
May I ask what you, or others use to seal the 2 halves of the hub together with please.
Thank you.
Graham