05-08-2018, 09:45 PM
(05-08-2018, 09:09 PM)Andy Bennett Wrote: Is it only in reverse?
I had similar problem but when going along (33 RP) after 30 mins or so.
I had just adjusted brakes and it turned out that I had taken up all the slack to the point where with just slight pedal application it all caught up, with loud banging and grabbing, ie either off or full grabbing on. I basically loosened everything back just a fraction to give a little more slack in the cables to give me room for a gradual application of the pedal and all was good again.
Andy B
Hi Andy, Thanks for your reply. Yes it is only in reverse gear. No problem after moving off. I check the hubs for overheating after a good run
and nothing to worry about there. Cheers