04-08-2018, 10:42 AM
(This post was last modified: 04-08-2018, 10:43 AM by Ian Williams.)
Aluminium is annealed by heating, I apply a layer of Acetylene soot when this burn off the temperature is right, soap or a match stick can also be used, the match stick will leave a burnt line at correct temp.
Check out my building a Special Body thread here, happy to answer questions, armed with a little knowledge and a hand full of tools shaping metal is easier than you might think.
Simon Jansens Blog is also a very good and informative read.
Check out my building a Special Body thread here, happy to answer questions, armed with a little knowledge and a hand full of tools shaping metal is easier than you might think.
Simon Jansens Blog is also a very good and informative read.
Black Art Enthusiast