10-09-2017, 12:22 PM
Hi Bryan
I always set them to exactly 1/4 of and inch - measured from a straight edge off the back of the crankcase (this was the measurement that Mr Dalby recommended ).
This gives a nice clutch.
Do make sure they are exact and all the same.
I am sure that you will be happy with that.
I always set them to exactly 1/4 of and inch - measured from a straight edge off the back of the crankcase (this was the measurement that Mr Dalby recommended ).
This gives a nice clutch.
Do make sure they are exact and all the same.
I am sure that you will be happy with that.