31-07-2018, 09:09 PM
Jboy there's a guy in Australia called 'The Klaxon Man' but I hear mixed reports and cost is likely to be high. Don't know anyone in the UK.
I bought a non-working Rist and all I had to do was clean the contact breakers, this is not at all hard just be methodical and put bits back where they came from.
There are a couple of good articles about repairing Rists, can't remember if it's in the Companion or Cornwall A7 club site I think - sorry I'm in Norway right now or would dig them out for you - someone here will know.
Finally Rists sometimes suffer cracked diaphragms - these are available off the web for 30 or 40 quid or you could perhaps make one.
I bought a non-working Rist and all I had to do was clean the contact breakers, this is not at all hard just be methodical and put bits back where they came from.
There are a couple of good articles about repairing Rists, can't remember if it's in the Companion or Cornwall A7 club site I think - sorry I'm in Norway right now or would dig them out for you - someone here will know.
Finally Rists sometimes suffer cracked diaphragms - these are available off the web for 30 or 40 quid or you could perhaps make one.