25-07-2018, 11:20 AM
Hi Simon,
Looks like others have your critical issue well in hand, but with respect to the gasket the rolled edge goes toward the head. The way I think about it is to consider where the pressure is being produced i.e., in the combustion chamber, and keep any edges or joins (potential weaknesses) as far away from that as possible. Good luck with the build.
Looks like others have your critical issue well in hand, but with respect to the gasket the rolled edge goes toward the head. The way I think about it is to consider where the pressure is being produced i.e., in the combustion chamber, and keep any edges or joins (potential weaknesses) as far away from that as possible. Good luck with the build.