24-07-2018, 05:23 PM
I started by removing the two nuts on the inside at the top of the windscreen right hand side. The lower screw came out to the front no problem, the upper nut came off OK but the screw will not come out, it is obstructed by the top hinge. I started cutting out the rubber that was in the 2 mm gap between the inner and outer parts of the surround, but I cannot see how this inner is fixed to the outer and rubber except by the two nut and bolts at the top each side. I have tried gently to work an old chisel underneath the inner section at the top by the bolts but no luck. Any ideas?