Chummy throttle shaft

[Bill Sheehan]

I have found a shorter shaft with a more angled carb end. The stop still isnt in the right place.

---

Ok option 2. I assume the extra bell crank is for the mag advance and retard. 

Im hopimg if i move the stop and get rid oglf the extra bell crank and it job done. 

Is there any reason for the kink in the pedal?

---

Hi Hedd.  Some time ago I measured up the different shafts.  If you email me direct on ausevenoz@gmail.com   (That may be a change from when we exchanged messages some years ago) I can email you more figures to confuse you further!  Cheers,  Bill