17-07-2018, 03:00 PM
If you fit new ones from the Seven Workshop the have the outer curved section as as a lump that requires a narrower running board from original.
This is what I have on my car. Front width is: 8 1/2” from sill to outer edge of the running board. Rear width is 3”.
The key to these type of covers is to make sure the running board sits in from the front and rear wing line about 3/4”.
This is what I have on my car. Front width is: 8 1/2” from sill to outer edge of the running board. Rear width is 3”.
The key to these type of covers is to make sure the running board sits in from the front and rear wing line about 3/4”.