17-07-2018, 01:10 PM
Like Steve, I can thouroughly teccomend speedi sleeves, I lubricate them with high temp grease on assembly.
I always fit the thrower behind the seal.
You will need to file the casting to expose the oil return aperture, I use a round file.
The oil troughs in Pheonix shafts are rarely symmetrical, in my experience, so lining the jets medially between both sides is necessary.
Good luck.
I always fit the thrower behind the seal.
You will need to file the casting to expose the oil return aperture, I use a round file.
The oil troughs in Pheonix shafts are rarely symmetrical, in my experience, so lining the jets medially between both sides is necessary.
Good luck.