17-07-2018, 12:11 PM
Finding my speedometer not working I used a drill in reverse and proved the speedometer and cable from the gearbox was all working.
The gear fitted has 8 teeth, on a spare gearbox I found one with 9 teeth, neither appeared to turn when rotating the drive shaft by hand.
The worm wheel on the gearbox output was not visible, the one on the spare box was far more visible.
Does anyone know how many teeth there should be, it is a 4 speed synchro box in a 1933 RP.
Roger
The gear fitted has 8 teeth, on a spare gearbox I found one with 9 teeth, neither appeared to turn when rotating the drive shaft by hand.
The worm wheel on the gearbox output was not visible, the one on the spare box was far more visible.
Does anyone know how many teeth there should be, it is a 4 speed synchro box in a 1933 RP.
Roger
Location:- Haverfordwest, Pembrokeshire.