07-07-2018, 01:55 PM
I assume you mean the dynamo / distributer end as the other gets splashed lubricated from the sump.
Grease - I don't think there is much benefit of any exotic brand as it didn't exist back then. A drop or two of oil down the screw head under the rotor arm to lube the bob weight carrier (there should be a split washer under the screw head to allow oil to drop down) - A DROP OR TWO only. And a few drops down the lubricating tube on the side of the distributer for the top and bottom bearings of the distributer.
Grease - I don't think there is much benefit of any exotic brand as it didn't exist back then. A drop or two of oil down the screw head under the rotor arm to lube the bob weight carrier (there should be a split washer under the screw head to allow oil to drop down) - A DROP OR TWO only. And a few drops down the lubricating tube on the side of the distributer for the top and bottom bearings of the distributer.