02-07-2018, 07:20 PM
(This post was last modified: 02-07-2018, 07:21 PM by Duncan Grimmond.)
I used a brass filler tube with a large brass washer silver soldered to it and this penetrates the skin with a neoprene gasket inboard, an ali escutcheon and rubber washer outboard with 6 S/S button head Allen screws.
If dismantling is required the Monza cap unscrews, the ali escutcheon comes off and the filler neck comes out of the fuel-proof flexible filler tube to the tank. The brass tube showing has been nickel plated since the pic.
If dismantling is required the Monza cap unscrews, the ali escutcheon comes off and the filler neck comes out of the fuel-proof flexible filler tube to the tank. The brass tube showing has been nickel plated since the pic.