02-07-2018, 09:22 AM
(This post was last modified: 02-07-2018, 09:30 AM by Ruairidh Dunford.)
Yes, Girling on the front and Austin on the rear are actually a very good combination in my experience Chris.
I would advise using the same levers you have on the rear on the front also, I.e. don’t use mixed length levers.
Nothing is impossible but reverting, an Austin rear axle converted to Girling, back to standard set up would be a lot of work in my opinion.
I would advise using the same levers you have on the rear on the front also, I.e. don’t use mixed length levers.
Nothing is impossible but reverting, an Austin rear axle converted to Girling, back to standard set up would be a lot of work in my opinion.