27-06-2018, 09:17 PM
(27-06-2018, 06:29 PM)Hentzant Wrote: Roger I have just replaced my rear cable and noticed that it was quite close to the rear spring when the car was jacked up under the rear axle .When the car is resting on its wheels the spring are flexed and there is more clearance for the cable .The larger diameter of the modified design might be an issue.
This is my original idea which was well clear of the spring and left the adjustment at the front.
I was just concerned that it might not be the best way of providing fine adjustment to the brakes.
I was trying to avoid using the type that clamp to the cable.
Roger
Location:- Haverfordwest, Pembrokeshire.