25-06-2018, 04:36 AM
(This post was last modified: 25-06-2018, 08:16 AM by Tony Press.)
(25-06-2018, 02:45 AM)Erich Wrote: Tony, I have a clamp on the dynamo that clamps the dizzy but still allows it to move for advance/retard. I also have a threaded hole in the end of the dynamo which would have some type of grub screw or other, that would keep the dizzy from moving up and down, as it would intersect between the two bushings on the dizzy.
My dizzy is a DJ 4.
Erich
Erich,
Sounds as though you have a 'combination' - does the advance retard clamp have a side slot to take a vertical stepped screw and spring into the dynamo end casting to hold the distributor in place - possibly not if you have the horizontal hole.
Tony.