18-06-2018, 08:02 PM
David Nightingale thinks my AH tourer has a non-standard wooden "peak" to the front of the hood.
I have said I could make it right, if need be.
David thinks the front edge is a lot thinner than standard.
The peak is still attached, so measurements are not exact: 44.5 " overall width, 4" deep, 15/16" thick at the rear, bevelled down to 1/4" at the front and 11/16" at the sides.
If you have one of these cars and could give me an idea of your "peak"s measurements, you would be welcome to claim a pint (beer or oil) if we meet one day.
Thanks
"Slack Alice" Simon
I have said I could make it right, if need be.
David thinks the front edge is a lot thinner than standard.
The peak is still attached, so measurements are not exact: 44.5 " overall width, 4" deep, 15/16" thick at the rear, bevelled down to 1/4" at the front and 11/16" at the sides.
If you have one of these cars and could give me an idea of your "peak"s measurements, you would be welcome to claim a pint (beer or oil) if we meet one day.
Thanks
"Slack Alice" Simon